Bob,
Do open up and take a look. Do take photos. Do share. :)
Bet the bottom plate is a good start.
Cheers,
Magnus
On 12/05/2014 10:31 PM, Bob Stewart wrote:
Hi Magnus,
It came in today. Looks good from the outside. No obviously bad smells, but I
can't power it up, as my PSU hasn't come in yet.
There is a paper Datum tag dated 6/2/03 on the outside. Looking through the
vent holes, I can see a Datum Cesium Beam Tube assembly Model Number 7613A/077,
Part Number 74514-110. I can see that the back two panels have been removed
and replaced, but nothing obvious has been done on the inside. There are two
SMB connectors on the main board that don't have anything plugged in, but
there's nothing obvious that they'd connect to. Does any of that tell me
something that I don't want to know? It's going to be a long wait till Monday.
=)
Bob
From: Magnus Danielson <mag...@rubidium.dyndns.org>
To: time-nuts@febo.com
Cc: mag...@rubidium.se
Sent: Wednesday, December 3, 2014 1:38 PM
Subject: Re: [time-nuts] PRS-45 Cs Standard
Hi Bob,
The manual is in your inbox.
It also describes a DS1 interface, which should be interesting to know
what the odd telecom signals is about. :)
Cheers,
Magnus
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
