Bob Thanks. On Sat, Dec 6, 2014 at 10:23 AM, Bob Camp <[email protected]> wrote:
> Hi > > It’s a pretty small difference. The normal “tuning” (mag field) > adjustments may be a bigger deal. A whole lot depends on the tube design. I > *think* they are a measure of the transit time in the tube. It’s been about > 30 years since I dug into that, so I could easily be a bit confused there …. > > Bob > > > On Dec 6, 2014, at 10:15 AM, paul swed <[email protected]> wrote: > > > > Bob > > Thanks but can you actually see that on the frequency out at 5 Mhz. > > If on the wrong transition or peak shouldn't that translate into an > offset > > also. > > > > On Sat, Dec 6, 2014 at 10:04 AM, Bob Camp <[email protected]> wrote: > > > >> Hi > >> > >> Sure you can set them on the wrong peak. If you really get confused, you > >> can also set them on the wrong transition … (gulp). > >> > >> Peak wise, the one you want is the highest Q / best SNR. Set it to one > of > >> the others and your ADEV degrades. > >> > >> Transition wise … not a good idea at all. > >> > >> Bob > >> > >>> On Dec 6, 2014, at 9:11 AM, paul swed <[email protected]> wrote: > >>> > >>> I have a curious question that really applies to all Cs references. > >>> Its possible to set them on to the wrong peak. > >>> Typically in the literature it will speak to at least 3 peaks and you > >> want > >>> to select the highest central peak. > >>> However if you select the wrong peak, how much would the output > frequency > >>> be off? > >>> I had read a tech note for the airforce that seems to indicate its > pretty > >>> easy to get on to the wrong peak. > >>> Regards > >>> Paul > >>> WB8TSL > >>> _______________________________________________ > >>> time-nuts mailing list -- [email protected] > >>> To unsubscribe, go to > >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > >>> and follow the instructions there. > >> > >> _______________________________________________ > >> time-nuts mailing list -- [email protected] > >> To unsubscribe, go to > >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > >> and follow the instructions there. > >> > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
