Correction of post sent about 5 min ago.
I had TX- going to pin 7. It should go to Pin 8 of Z3810. Bill Riches I finally got my 3810 talking with my windows 7 64 bit pc. 1. Ordered a Gearmo GM-485422 USB to RS-485-422 interface converter from Amazon - 39.95. http://www.amazon.com/GearMo%C2%AE-5ft-RS485-RS422-FTDI/dp/B005CPLOVW/ref=sr _1_8?ie=UTF8 <http://www.amazon.com/GearMo%C2%AE-5ft-RS485-RS422-FTDI/dp/B005CPLOVW/ref=s r_1_8?ie=UTF8&qid=1417918933&sr=8-8&keywords=gearmo+usb+rs-232+serial+adapte r> &qid=1417918933&sr=8-8&keywords=gearmo+usb+rs-232+serial+adapter The driver disk that came with this unit does not have 422 drivers on it -only rs-232 drivers. I went to gearmo.com and downloaded the correct drivers and a correct manual. Installed drivers and it works fine. 2. Downloaded and installed Z3811.exe. Opened program and I am getting more info from the boxes than I will ever need. 3. Pin out that worked for me: CONVERTER Z3810 TX + 4 TX- 8 RX+ 5 RX- 9 GND 7 73, Bill, WA2DVU Cape May, NJ _____ <http://www.avast.com/> This email has been checked for viruses by Avast antivirus software. www.avast.com <http://www.avast.com/> --- This email has been checked for viruses by Avast antivirus software. http://www.avast.com _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
