[email protected] said: > Can anyone advise if this is possible, and if so what software is needed? > Any idea what sort of accuracy would be achievable?
I'm not familiar with Solaris. I've never worked with a 58503A, but I have worked with the Z3801A and KS-24361. I'd try ntpd. There is probably a version that comes with Solaris. USB probably doesn't support PPS. I'd expect time to be within ballpark of 10s of ms, roughly what you would expect with a good network connection so use that as a sanity check. You will need to setup your ntp.conf to use the HP driver, 26. You will need to setup your 58503A to use UTC in T2 mode. :diag:gps:utc 1 (and reboot?) :ptime:tcode:format F2 You can check the GPS/UTC setting on the status page, and check the T2 setting by sending: :PTIME:TCODE? -- These are my opinions. I hate spam. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
