I tried something like that once just to discover that the OCXO VFC port
had low impedance, so my voltage divider didn´t behave very well. So i
put an amp op in unitary gain configuration between the two and things
improved a lot. Then I changed the amp op for a DP precision part and
things improved again. Then I choose resistors/trim pot with low TCR for
the voltage divider and things improved again. Then I made a good
layout, termally coupling the resistors.... well, you see this has no end :)
Daniel
On 06/01/2015 22:40, ct1dmk wrote:
Hi,
With a multiturn pot and a 78L05 I can get a 0 to 5V EFC to tune
an OCXO on desired freq. But... maybe other voltage regulators
or other scheme have better temp stability than the old 78L05.
Before I crawl lost in new'ish fancy regulator land does anybody
know the killer solution/IC for this job ?
Luis Cupido
ct1dmk.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
