Does anyone have experience setting up a SR620 for use with TimeLab?
(I have used my 53132A in its' "Talk Only" mode quite successfully.) I am using a Null Modem RS232 cable (I have also tried a straight through one). I am running a 10MHz oscillator into the first channel of the 620 against my Fury as a TB and trying to produce an ADEV. The TimeLab "Monitor" box shows the following text updated every second or so: "STRT;*WAI;XAVG" I have chosen "Acquire" for the SR620 from the TL software. I have set up the SR620 with the following settings: Configuration Menu: CTRL 1. RS232 19.2K 2. Echo OFF 3. Bits 8 4. PAR None 5. COM port correctly set in TL (using an Edgeport converter for RS232 to USB) Configuration Menu: OUT 1. Output is PRINTER 2. PmPort is PRINT 3. Graph is OFF I have tried various other choices, but nothing seems to cause TL to read anything but STRT;*WAI,XAVG. I would be happy to exchange info off list. jsrobbins at earthlink.net. Jim Robbins N1JR _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
