@Juerg, try swapping the lamp module. This worked with my two PRS10 Goetz
Am 22.02.2015 um 16:44 schrieb Jürg Kögel:
Fellow time nuts. I have two SRS PRS10 Rb’s that I did purchase 10 years ago. Both have been working for the last nine years. One did fail last year and I finally got around to looking at it in the last two weeks. The attached picture shows the trauma to the lamp board. I do not understand the corrosion since it has been in a very controlled environment in my basement. Since the failed unit does have the 1 pps loop control I moved the processor board to the still working unit. Did not work. Does it take more than just moving that one board to get 1 pps loop control? Second any ideas as to what may have happened to the lamp heater board. Any recommendations? Plan on making a replacement board. Have a power FET MRF134 Thanks Juerg _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
_______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
