In my project, I was using LT6957 to share 10Mhz from my TBolt. It was perfectly fine for my setup. I split 10Mhz to feed the clock of MCU and second output was connected to DDS block (AD 9852).
Regards, Vlad On , Chris Wilson wrote:
27/03/2015 17:14 My T/Thunderbolt has operated flawlessly for some years feeding a David Partridge frequency divider board. The board gives 10Mhz and lower divisions of 10MHz down to the KHz level out, as square waves. What I need to know is, can I T off the T/Thunderbolt 10MHz feed to this board and take a second sine wave output direct from the Thunderbolt, to drive a transceiver GPS disciplined 10 MHz frequency standard input as well as having it feed the divider baord, which has a square wave output? Thanks. The .pdf for David's board is at: http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&ved=0CDMQFjAD&url=http%3A%2F%2Fwww.perdrix.co.uk%2FFrequencyDivider%2FFrequency%2520Divider%25202.1.pdf&ei=g5AVVbDXGcSy7QbLioCAAQ&usg=AFQjCNHiXeXt-NZksvMBKYHfkJPf5mn_Fw&sig2=kXB0iLgZhoDuB8shplLFqA&bvm=bv.89381419,d.ZGU?
-- WBW, V.P. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
