Hi The savage was a typo, but I suspect that in this one case the typo may have been pretty accurate. Based on the pictures I’ve seen of the people salvaging the boards, it’s not a very precise process.
Bob > On Apr 12, 2015, at 7:33 AM, James via time-nuts <[email protected]> wrote: > > Was the "savage" deliberate or did you mean "salvage" - they are probably > both accurate.:) > > James > > > > > > > > -----Original Message----- > From: Bob Camp <[email protected]> > To: Discussion of precise time and frequency measurement <[email protected]> > Sent: Sun, 12 Apr 2015 0:17 > Subject: Re: [time-nuts] Ultra High Stability Time Base Options for 53132A > > > Hi > > All of the MV-89’s that I have seen are very much a crap shoot in terms of > > what you get. Out of a dozen or so I’ve bought from various sources, none > has > met the original specs on the unit. There have been a wide range of issues. > Doing > a full test on one involves a lot of work. The problems with some of them > are major > the problems with others are fairly hard to spot. > > I do not > believe that’s a reflection on the original design of the part. I’d bet that > nearly > 100% of them meet spec when new. I think it’s purely due to the amount > of violence done to > them when they are pulled from boards during the savage > process. > > Bob > >> On Apr 11, 2015, at 8:01 AM, J. L. Trantham > <[email protected]> wrote: >> >> Has anyone done any testing/comparison of the > three aftermarket UHS Time >> Base Options for the 53132A that are on theBay? >> > >> >> >> One is from Poland: 111643536543 >> >> >> >> Two are from China: > 181698758773 and 331420737911 >> >> >> >> All use the Morion MV89A and all > appear to be 'plug and play' with the >> automated time base calibration process > of the 53132A. >> >> >> >> I recently added the 3 GHz Prescaler from the > seller in Poland >> (111631156891) and was very satisfied. No connection other > than a satisfied >> customer. >> >> >> >> I also recently added the HP Opt > 010, one of the 10811 based time bases, and >> was very satisfied as well. Just > wondering if there is something better. >> >> >> >> Thanks in advance for any > thoughts. >> >> >> >> Joe >> >> >> >> >> >> > _______________________________________________ >> time-nuts mailing list -- > [email protected] >> To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the > instructions > there. > > _______________________________________________ > time-nuts mailing > list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the > instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
