All: Picked up a FE 5680B from Ebay awhile back. Appears to work fine, but is limited to a 1pps output. However there is a point on the PCB that's documented that has a 20Mhz output. There is actually a clean 60Mhz output as well.
http://www.ebay.com/itm/FEI-fe-5680b-rubidium-oscillator-With-1pps-20mhz-output-ONLY-10mhz-NEED-to-MOD-/291419889143?pt=LH_DefaultDomain_0&hash=item43d9fa9df7 I would like to tap this 20mhz output and feed it to a divider/buffer circuit for a 10Mhz output at 50ohm. Can anyone recommend a good schematic for such a purpose. I was looking at the project from David partridges web site http://www.perdrix.co.uk/FrequencyDivider/index.html Cheers and thanks in advance. -=Bryan=- _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
