Hello Bob:
To generate program file, you need the KEIL develop environment, or you can
just using HEX file to program MCU directly, the HEX file will put on the GIT
website late time when all software function finished. If anyone interested in
HEX file of current version (not including off-line acqurie and Talk Only
function), send off-line email to me, I will send you a copy.
The other url of original email contain the schematic and PCB files, you
need Protel DXP files to open it, the PDF format schematic file and a guide
document will be published late, maybe few weeks. The document will be Chinese
language, but If people need, I think I can translate a short English version
(if you guys don't hate my bad English). And I will collect some questions and
forward them to developers. But you know, it's a Open Source project, all
developer uses their spare time to do these job, so the question maybe can't be
reply quickly or 100% responsed. Anyway, this project is still in progress, if
any important news happened, I will let you people know.
Best regards.
Hui Zhang /BA6IT
At 2015-04-26 21:42:00, "Bob Camp" <[email protected]> wrote:
>Hi
>
>After poking around a bit, more questions that comments.
>
>1) It looks pretty cool.
>2) Any idea of what the tool chain was that generated the files? (I probably
>need viewing programs that I don’t have)
>3) Do they have any plans to bring up the doc’s in English? (even if only
>through a translation program)
>
>Once they get the stuff running, I suspect there will be a lot of questions
>about interfacing it to things
>like TimeLab.
>
>Bob
>
>> On Apr 25, 2015, at 11:42 PM, Hui Zhang <[email protected]> wrote:
>>
>> Hi:
>>
>> Here is a open source GPIB project that developed by some Chinese amateurs,
>> the developer released all of the information about hardware and software,
>> including circuit diagram, PCB diagram, firmware source code, communication
>> protocol and upper computer PC program (late on). The project name is
>> CARE.If you are interested you can build your own CARE, but please don’t use
>> this open source project for commercial purpose.
>>
>>
>> Specifications:
>>
>> WiFi expand interface （6 IOs + 3.3V power supply）
>>
>> Sensor expand interface (2 IOs + 3.3V power supply)
>>
>> j-link SWD mode interface
>>
>> TF Card slot
>>
>> RJ-45 connector (100Mbps)
>>
>> USB (via CP2102 connect to LPC1768, can be set to ARM inside USB connect by
>> jumper)
>>
>> Mode Switch (Online or offline acquire)
>>
>> MCU: LPC1768
>>
>> USB TO 232: CP2102
>>
>> Network PHY: LAN8720A
>>
>> Temperature sensor: DS18B20, DHT22 and other model single bus sensor will be
>> support at late version.
>>
>> GPIB interface chip: SN75160，SN75162
>>
>> PCB size：60mm*100mm
>>
>>
>>
>> CARE firmware: https://git.oschina.net/gpib/CARE.git
>>
>> Upper Compter program: https://git.oschina.net/xknife/MonitorKnife.git
>> (Under Construction)
>>
>> Circuit diagram and PCB: https://git.oschina.net/gpib/CARE-DXP.git
>>
>> BOM list: http://bbs.38hot.net/forum.php?mod=viewthread&tid=115514
>> BOM_GPIB.rar
>>
>> (will put file in GIT late)
>>
>>
>>
>> Protocol mode:
>>
>> 1, Transport protocol transfer mode, the GPIB address of equipment can be
>> user define of LAN USB and WIFI port
>>
>> 2, The developers defined GPIB protocol, support multi-address and
>> multi-equipment, the protocol file is (so far, only Chinese language version)
>>
>> http://bbs.38hot.net/forum.php?mod=viewthread&tid=115514
>>
>> Care通讯协议说明-b1.v150410.2.rar
>>
>>
>>
>> Testing tool”
>>
>> 1, Some Serial port tools like as sscom 3.2; send HEX or ASCII command to
>> CARE via serial port;
>>
>> 2,TPC&UDP testing tools, send control or SCPI command to CARE via Ethernet
>> port;
>>
>> 3,ASCII code converting tool
>>
>>
>>
>> The project is not over, so far, the hardware part is OK, but the code of
>> offline acquire and Talk Only function is not finish. (coming soon….), some
>> various equipments were tested by SCPI or old HP GPIB command, they work
>> very well.
>>
>>
>>
>> The Care Project Post in Chinese 38hot forum, many pics:
>>
>> http://bbs.38hot.net/forum.php?mod=viewthread&tid=115514
>>
>>
>>
>> This open source project can't be used for commercial purpose.
>>
>> The main developer’s email: [email protected]
>>
>> Have a fun!
>>
>>
>> Hui Zhang /BA6IT
>> _______________________________________________
>> time-nuts mailing list -- [email protected]
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
>_______________________________________________
>time-nuts mailing list -- [email protected]
>To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
