In response to Oz-in-DFW > Given your description here, I'm guessing a millisecond or ten > will do that as long as local cluster relative accuracy is maintained.
Spot on; I hope I'd made it clear earlier, but perhaps I've been communicating poorly. My goals w.r.t. to sync to UTC and w.r.t. holdover are very loose. I do need time sync intra-cluster to be tight (sub millisecond, 100 nano as a stretch goal). UTC sync can comparatively be terrible; 10-1 ms is fine, and I can live with "bad NTP, 100 ms" if I must. From specs, */really/* good quartz is my limit and /good/ quartz is acceptable, so long as it doesn't mess with the intra-node PTP tightness. I'm mostly looking at TCXO options. OCXO isn't out of the question, but rubidium doesn't seem to give $/value. > Yes, the master will have a fairly low phase noise local oscillator as > it's internal reference. Everything will synch to that. If all you are > doing is syncing the local cluster you don't even care about time > outside. This is true for most industrial applications that are just > syncing machinery. Thanks for the info. PTP isn't as well understood/documented as NTP, so I've not been as certain about my decisions. Of course, that is fair for a relatively new standard. Currently, I think my two best options are: 1) CDMA enabled PTP appliance (set and forget), or 2) PTP appliance running as stratum 2 from good NTP. Thanks to everybody for the feedback. -joe _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
