Attached is a screenshot of the setup window. I manually typed in 1E-6 as the units. I also hit Monitor and let it average the reporting interval for a while until it settled at 1.00 seconds.
Originally I was leaving the time unit as 1, and microseconds in in the serial string was not being detected to set the units automatically. I'd be happy to send you a tim file as well if necessary. Let me know. Thanks Dan On Tue, Jun 30, 2015 at 8:51 PM, John Miles <[email protected]> wrote: > Let's see a snapshot of your acquisition dialog, just before you hit > 'Start'. (Or send me a .tim file directly.) It can be tricky to configure > the test setup for a TI measurement, since so many more things can go wrong > compared to a frequency-based setup. > > -- john, KE5FX > Miles Design LLC > > > -----Original Message----- > > From: time-nuts [mailto:[email protected]] On Behalf Of Dan > > Watson > > Sent: Tuesday, June 30, 2015 11:48 AM > > To: [email protected] > > Subject: [time-nuts] Help with my ADEV measurement setup > > > > Hi, > > > > I'm trying to take some ADEV measurements with my 53131A, and I'm having > > some issues. This is my setup... > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. >
_______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
