Several answers I am located in boston ma How do I know its the 3586. All other systems are working and not failing. Using the same austron 2100 with another stable reference source has no problem.
Alex there is only 1 station on the east coast the gri is 89700. But simply tune the 3586 to 100 Khz. Not to likely you will hear the pulses. Sorry for the brief answer Regards Paul WB8TSL On Mon, Jul 20, 2015 at 9:02 PM, Alex Pummer <[email protected]> wrote: > Hi Paul > where could I find the frequency of "our Loran" [the Californian Loran ] I > have an old HP3586 "radio receiver" > 73 > Alex > > > On 7/20/2015 1:50 PM, paul swed wrote: > >> The system came up at 9 am and has been working well the austrons and SRS >> fs 700 are doing very well. Some static crashes and such. >> >> This test has however revealed something I did not want to know. The HP >> z3801 seems to have a problem of jumping phase. So the trusty box is >> finally showing its age. It will be quite a job to dig into. >> Regards >> Paul. >> WB8TSL >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
