> bypassing the inverter you will improve phase noise. Yuo will probably > need a sine buffer at 10MHz to drive 50 ohms.
This separator con be the solution: http://www.timeok.it/files/hp5065AoptH10v200.pdf high input impedance, output 50Ohm, high power handling and low additive phase noise. But before measure using an oscilloscope the output of the GPS OCXO directly on the output pin to verify if there is a sine-wave or square Luciano timeok Message sent via Atmail Open - http://atmail.org/ _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
