Thanks Hal, that's interesting, will try and see how far I can get. -=Bryan=-
> To: [email protected] > From: [email protected] > Date: Fri, 25 Sep 2015 23:40:40 -0700 > CC: [email protected] > Subject: Re: [time-nuts] FE-5680B Rubidium and DDS > > > > I as well wish there was a quick way of converting it back to 10Mhz. I am > > sure it can be done, just not sure how or where to look > > If the 10 MHz is visible for a second or two, there is probably a gate to > turn it on/off. If I wanted 10 MHz, I'd open it up and trace the wire back. > If it goes to a gate, you might be able to lift the pin for the other input > and wire it hi/low. There is a good chance it goes to a FPGA where you can't > get at the gate. > > > > > -- > These are my opinions. I hate spam. > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
