Hi The (likely) biggest issue with the M12 clone boards is that they are 12 channel. The report strings have more satellites in them than the old 8 channel boards did. That’s going to mess up the parsing algorithms if you want the REF-0 to work with all the data (record the sat info vs ignore it).
Bob > On Oct 7, 2015, at 7:51 PM, Gregory Beat <[email protected]> wrote: > > Bob - > > > > Thank you for reference to the Synergy SSR-6T. > > I talked to Gina at Synergy early today. > > > > The Synergy SSR-6T is still available, but now at the regular price of > $68.20 > > > > The Synergy SSR-6T GPS receiver would likely not be appropriate for usage in > the Lucent KS-24361, > > since it does not completely emulate the Motorola Oncore UT+ receiver. > > Synergy does sell the adapter board for fitting M12 series receivers > > to the larger PCB form factor of the Motorola 8-channel receivers (VP, GT, > UT) > > > > SO, full speed ahead with Dan's uBlox work on the REF0 ! > > > > greg > > w9gb > > === > > Synergy Systems SSR-6T receiver (some information from CNS Systems / Rick > Hambly, W2GPS). > > > > The Synergy SSR-6T GPS receiver has the same footprint as the > Motorola/iLotus M12 series receiver. > > The SSR-6T has a uBlox LEA-6T receiver that operates in uBox NMEA or Binary > mode. > > A version of this board has a processor that permits emulation of M12 series > messages as well as > other modes. > > > > The CNS Systems TAC32 software changes to support SSR-6T: > > Added the @@Wb message to switch the SSR-6T from M12 to uBlox message mode. > > Added "@@Wc" to switch to the boot loader. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
