That probably is an original thermal cutout. It matches ones I have
found when repairing 10811As.
David
On 10/20/15 7:59 AM, J. L. Trantham wrote:
Dimitri,
That clearly is not the 'original' thermal fuse that I found in my 10811.
Mine was a small, axial lead, cylindrical part.
It looks like someone substituted a different part (is that a fuse or a
cutoff?) and did a poor job soldering. I think the temperature is correct
though. I'd have to look at the manual to know for sure.
My 'fuse' failed and I replaced it. All the soldering was OK on my unit.
Joe
-----Original Message-----
From: time-nuts [mailto:[email protected]] On Behalf Of Dimitri.p
Sent: Monday, October 19, 2015 2:32 PM
To: [email protected]
Subject: [Bulk] [time-nuts] 10811 unsoldered fuse
How common is it to find undetected missing solder on 10811 parts after all
these years?
Dimitri
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
