Hello Time-Nuts, Looks like the TLI interface on my PRS-50 has died (I just can't get anything through either serial port - 9600,8,N,1), and I need to switch the auxiliary output from its current 5MHz to 10MHz. When I remove the TLI interface I can see status over the rear RS-232 connector at 2400,7,O,2, so it looks like it is working. Trouble is, it looks like I need the old Datum DOS monitor.exe program to be able to talk to the PRS-50 now. Google doesn't seem to have been my friend, if anyone has it squirreled away I would very much appreciate a copy. My guess is that this software was used with the PRS-45 also.
There is also a Windows program called Instrument Monitor that works with the 2400,7,O,2 interface, but doesn't seem to be able to change the auxiliary port or if it can, let me know how). The Monitor2, Monitor3, and Hyperterminal can only be used with the TL1 command language. I have copies of all of them (but are now useless). Thanks in advance for any help. Regards, Skip Withrow _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
