The phase noise of the 3335A is typically much better than spec. Definitely way better than a 3336C and has one of the worlds best laser-trimmed attenuators. The 8642A and 8662A are better on phase noise, but much harder to keep working. Anyone wanting a great signal generator should jump at this.
Rob NC0B Sent from my iPad > On Nov 9, 2015, at 5:31 AM, "Bill Hawkins" <[email protected]> wrote: > > > > Group, > > I have the subject frequency synthesizer and the expanded foam shipping > container it arrived in. > > I also have to move to an apartment in a life care community in two > weeks. > > True, the focus of this list seems to be on 10 MHz, but if you'd like to > experiment with precision frequencies between 200 Hz and 80 MHz, this is > for you. > > The instrument has been checked with a few minor repairs. It is fully > functional as measured with a Racal 1992 counter and rubidium external > standard. Amplitude was checked with a Triplett 630 VOM, so accuracy of > the measurement was 5% and didn't go down to millivolts. A scope could > see that there was output that low and seemed to follow the dB ratios. > > I'm asking $200 for it shipped in continental US. The Racal counter is > available for $100 shipped. > > At this point I don't care if it goes to a dealer who sells it for > $1500. But if there are multiple requests, it goes to the best > impoverished experimenter story. > > Please reply directly to [email protected], not the list. > > It's been fun. > > Bill Hawkins > > P.S. Also have a 3335A parts unit and an Efratom FRK L rubidium pulled > from a Collins Omega navigation set, oh, and a set of the older Lucent > RFTG XO and RB units. The newer units don't have RB oscillators. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > > -- > If this email is spam, report it to > https://support.onlymyemail.com/view/report_spam/ODExMjI6MTgyMzY3NTg4MTpyb2JAbmMwYi5jb206ZGVsaXZlcmVk > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
