Hi,
Lacking the charging controller in mine, what would be a good approach
to go about and build one?
Need to replace the battery setup in my XSRM setup too, the packs I
installed is now dead.
Tempted to think in terms of LiFePO.
Cheers,
Magnus
On 11/21/2015 03:45 AM, Dan Rae wrote:
On 11/20/2015 4:54 PM, Bob Camp wrote:
Hi
I don’t in any way doubt your count. If indeed they are putting 21
cells into that circuit,
the NiCads likely don’t last as long as they might with a different
charging circuit ….
Bob
Bob, I was answering Corby's query; mine had an original -hp- battery
pack which I assumed was designed by someone who knew what they were
doing, so I just put new Chinese made 2.2 Ah Nicad cells in it, exactly
the same number as the original, however I don't know the capacity of
the originals, they were unmarked. Five or six years later it still
will hold the thing up for at least twenty minutes, which I would think
is what matters.
It would in any case be difficult to fit any more than 21 in the space
available.
Dan
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
