Hello Jim, Could you point me to this list of test equipment unloaded by the DOD contractor, please? Thank you.
Regards, Miao On Sunday, December 6, 2015 9:00 PM, Jim/Anna McIntyre <bbim...@gmail.com> wrote: Greetings all, My name is Jim, I'm a Noob to your list. A local DoD contractor unloaded a heap of test equipment lately, and I scored a 5065A. It's s/n 1532A00666, has an Olive green-ish RVFR, and a 00105-6103, series 1284 Quartz oscillator. I have had the instrument powered up for about an hour now. (I first checked the +/- 20V supplies and they're OK.) I have a 1A source connected to the TE lines. At the end of the 1st hour here's what I'm seeing (Open Loop Mode). Batt 48 Supply 38 Lamp Oven 30 (down from 50) Cell Oven 30 (down from 50) Osc Oven 44 (down from 50) Photo 28 5 MHz 32 Control, Error, 2nd Harmonic all read 0 I adjusted the Quartz Coarse control to be within 10-7. Fine is set to 250. Synth output measures 5.315 005 728 MHz, and is about 1.8 Vpp. Control, Error, 2nd Harmonic all read 0 after I switch to Closed Loop and hit 'Start' Please advise on next steps... Thanks _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.