Ole, I took a look out of curiosity. The prices are a bit all over the place. I have not experimented with this. Not sure of any advantage over the Lucent Ref1 and Ref0s that have a good oven oscillator and actually work at a consistent price. Good luck if you move forward and let us know how it works out. Regards Paul WB8TSL
On Fri, Dec 25, 2015 at 6:35 AM, Ole Petter Ronningen <[email protected] > wrote: > Hello > > I'm sure many of you have noticed quite a few surplus NOS Novatel OEM-V3 > L1-only units appearing on eBay lately. Reading the firmware manual, it > seems the ProPak is capable of steering an external oscillator with the > addition of a filtered chargepump circuit. Has anyone made any experiments > using this functionality? > > Also, a couple of labs (APL and USNO) use ProPak-V3 receivers to > participate in TAI, by the use of PPP. BIPM has a little information about > the ProPak (calibration procedures), but other than that I have not found > much information about the configuration of the receiver in this particular > setting. Any clues would be appreciated. > > (In case anyone is interested - the receiver can be software upgraded to > also track L2 - the license is north of USD2K..) > > Thanks, > Ole > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
