Hi Thomas, If you haven't already seen them I made a couple of posts regarding this unit last November in response to a similar question, and these might help with running the software etc. I've uploaded a file containing the manual and software to Mega.nz ...... https://mega.nz/#!eVggzQDD!BD76z_UMLGtjhJmvO-APeW-A7bMIVEY7oZUI389IEAE A bit of a messy link but they encrypt all downloads as a matter of course and that includes the key, any problems please let me know and I can send it direct but decided to post it here in case others are interested. If someone could upload this to Didier's manual site that would be appreciated, I've had a few problems again recently with attempted uploads from here. Regards Nigel GM8PZR
Hello Time-Nuts, I have recently come into possession of a Navsymm Proteus GPS Time and Frequency Generator. Also known under Navstar Systems. There have been various postings about this piece of kit, in some of which there was a mention of the CDU software which allows to configure it. The thing powers up but does not lock on. The manual says this could be the case if it was moved since last locked and it may need configuring. To cut a long story short, does anybody have the CDU software and could it be “shared”? It seems to need an old-style PC but that won’t be a problem around here. I will meanwhile check if any sense can be made of its outputs, in case there is some hardware problem. Thanks in advance, Thomas. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.