Bob, et. al., Thanks for the advice and information. That has helped a lot in closing some holes and gives me a lot to consider. I am continuing to research and learn, this is not a short term project as in building it this week or month. I need to learn and work up to the full project. I will probably start small with pieces and gather what equipment I can. Like many of my projects, this one will probably have multiple sub-projects. Especially if I manage to snag test equipment that needs repair.
Regrettably, the 260 was ordered from China, there were none from the US when I ordered. I did know that it would be a crap shoot, but for $26 it was something I could get now. I might even be lucky! I am planning on including sawtooth correction in hardware. But, I have a good bit to learn for that. It appears to be fairly simple given your processor reads the sawtooth correction from the GPS receiver and sets up a programmable delay for each cycle. I have a dozen pieces floating in my head, I am certain I will be back for more advice. Thanks again. Mike _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
