[email protected] said: > Hal makes a good point the Z3801 RS232 port is not exactly standard make > sure the COM port settings in Z38xx and in the set up on the computer > (CONTROL PANEL) are set to 19200baud, 7, 1, ODD. BOTH have to be set up as > these are not computer industry "standard"
The other non-standard part of the Z3801A is that it comes setup for RS422 rather than RS232. So I'd check with a scope during power up before doing anything more complicated. There are jumpers inside so it's easy to switch to RS-232. But it might work most of the time without that if you get the wiring right and are lucky, and any particular USB gismo might not be lucky enough. -- These are my opinions. I hate spam. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
