There are two ways to do it. The first is to turn off AutoScale. You
can then set the axis to whatever you want. Right-click on the axis and
uncheck "AutoScale X". See AutoScale.png.
The hard way is to force the axis to be what you want. First you turn
off AutoScale. Then you right click on the graph icon in the block
diagram and go through five menus to select Maximum. See SetRange.png.
Once you have Maximum, you just drag down on the bottom edge of the
property node to get Minimum.
Brent
On 2/1/2016 11:35 AM, Bill Reed wrote:
I have just gotten Labview Home, This is the first serious vi I have written.
It sweeps an HP3325A , collects data on an HP3478A and sweeps.
The sweep is strip and I would like the Xaxis to be stationary with Fmax and
Fmin as the limits. I can not find this plot type in the library.
Any suggestions?
Bill Reed
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
