I doubt that will work without going through another uc to do translation. I have tried using UT+ receivers in my Z3801A and they don't work even though they are plug compatible. If someone has a recording of the data sreams from a standard Z3801A then it could be done. Would it be worth the effort?
Frederick Bray <[email protected]> a écrit : >This brings up a question that I have been wondering about. Has anyone > >tried using one of the Synergy M12/adaptor board assemblies as an >update >in the Z3801 or similar unit? If the original firmware just ignores >the >extra data, perhaps the Synergy unit might work? They are quite >inexpensive on the used market. > >See: > >http://www.synergy-gps.com/index.php?option=com_content&task=view&id=173&Itemid=115 > >As a further upgrade, might it be possible to replace the M12 receiver >unit on the Synergy board with a Jackson Labs M12M replacement >receiver? While the additional data would be lost / ignored, the >superior characteristics of the Jackson Labs unit could prove helpful. > >Thanks for any information. > >Fred Bray >KE6CD >_______________________________________________ >time-nuts mailing list -- [email protected] >To unsubscribe, go to >https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. -- Envoyé de mon téléphone Android avec K-9 Mail. Excusez la brièveté. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
