On 2/26/2016 12:58 PM, Dickson Fu wrote:
Hi all,
A bit frustrated with my newly bought Z3815A. After power up, the "Block"
indicator stays lit and no other LED turns on except Power indicator. It
appears that GPS has never discipling.
I cannot find any user manual for Z3815A and other hp smartclock does not
have the same front panel design. Anyone knows the definition of the staus
indicator?
Active
Standby
Unlock
Block
Best Regards,
VR2WHF
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Dickson
While not familiar specifically with the Z3815A, I believe that all of
the Z38xx series use basically the same software to talk to them and
most of the command strings are pretty common ... Before throwing the
thing off the top of the Orchard Towers
1) Do you have a software program talking to RS232 port ( probably in
the back). The program should allow you to reset the unit and then go
through what is called a "SURVEY" to get it tracking
2) Describe the antenna setup you are using
Dave
NR1DX
--
Dave
[email protected]
www.ArtekManuals.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
