Both good answers the old connect to the bottom, and my favorite get the connector. I used both methods. Connected to the bottom, fixed the unit, purchased the real connector. It was something like $18 or $30. Search time nuts because 2 years ago someone figured out the model numbers and source. Something like greybar as the supplier. The same connector also works on the HP cesiums. I pulled the connector off but unfortunately no useful numbers. It can be strapped for either voltage and as suggested get the manual from Artek. Regards Paul WB8TSL
On Thu, Mar 17, 2016 at 12:35 PM, Poul-Henning Kamp <[email protected]> wrote: > -------- > In message <C66D906890F94E07B26A6139637C04AE@pc52>, "Tom Van Baak" writes: > > With respect to 120/240VAC, the 5065 I have is jumpered for 5065, the > manual > (available from Artek) has the details. > > -- > Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 > [email protected] | TCP/IP since RFC 956 > FreeBSD committer | BSD since 4.3-tahoe > Never attribute to malice what can adequately be explained by incompetence. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
