> On Apr 28, 2016, at 10:19 PM, Clint Jay <[email protected]> wrote: > > Does the PPS appear? >
I tested this just now and, no, it does not ever appear. I do note that the output frequency is quite a bit on the high side. Could this be a case of the C217 trimming fix being required, or is Bert right and the unit is hosed? > On 29 Apr 2016 02:02, "Nick Sayer via time-nuts" <[email protected] > <mailto:[email protected]>> wrote: > Just as I started testing the GPS discipline board prototype, my FE-5680A > seems to have developed a very odd problem. > > If I give it power, it outputs a “kinda” 10 MHz sine wave while it sweeps > around looking for a physics lock. This is as expected. > > About the time that I would expect the lock light to turn on, instead the > output just stops. The lock light never comes on. > > This unit’s been working fine for months now. It’s conceivable that I’ve sent > it some sort of serial command it couldn’t digest, but using the Windows > calibrator software seems to work - albeit there not being any output from > the oscillator at all. > > > _______________________________________________ > time-nuts mailing list -- [email protected] <mailto:[email protected]> > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > <https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
