Hi Pete, >From Bob Camp's comments, I think you're right. I hadn't considered survey as >an issue by itself. I've only been concerned about timing, and one of the >Ublox manuals says to turn off SBAS for timing applications.
Bob -------------------------------------------- On Sun, 5/8/16, Pete Stephenson <p...@heypete.com> wrote: Subject: Re: [time-nuts] How to achieve best results from U-Blox survey-in To: "Discussion of precise time and frequency measurement" <time-nuts@febo.com> Date: Sunday, May 8, 2016, 3:32 PM On Sun, May 8, 2016 at 7:25 PM, Bob Stewart <b...@evoria.net> wrote: > Yes, disable all except GPS sats. Also, turn off SBAS, set your max and min number of sats (defaults are probably what you want), and the satellite elevation mask. The elevation mask defaults to 5, but can you really see that low? Hi Bob, Out of curiosity, why would one turn off SBAS? My first instinct is that SBAS support could only improve the accuracy of one's fix, as it supplies additional correction information that improves on the normal GPS signal. I would (perhaps naively) think that enabling SBAS during the surveying would improve the results. Of course, I could very well be mistaken and would be happy to be corrected by those more knowledgeable. Cheers! -Pete -- Pete Stephenson _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.