Mark wrote:
Charles,
You are confusing these units with those made by that ham in China (can't remember his
callsign, begins with a "B"). The guts of these boxes is a telco GPDDO board
made by either Trimble or Symmetricom (you can tell because of the 6.0V power
requirement). And that reference to a Thunderbolt in his Ebay listing seems to refer
to him comparing the output of these to his Thunderbolt, not that the oscillator in
them came out of a Thunderbolt.
Thanks, Mark, I stand corrected. That also means it will have a PLL,
not an FLL.
How good is the OCXO? Can you adjust the loop tuning parameters for best
stability with the individual OCXO? If not, does the loop cross over
from the OCXO to the GPS at an appropriate tau, or does it exhibit the
notorious "crossed over too early" hump in the xDEV plots? Does it
store its surveyed location or does it need to do a new survey every
time it is powered up?
Finally, is there a good reason to pay $160 for one the seller has put
in a box, or can you buy the board for much less and do that yourself?
Best regards,
Charles
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
