KO4BB's site is massive, can you pin down the cable drawing ? Tnx, Dick, W1KSZ
-----Original Message----- From: time-nuts [mailto:[email protected]] On Behalf Of Douglas Baker Sent: Monday, July 18, 2016 2:39 PM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Lucent boxes Chris, The RFTGm ("m" for miniature even though still a large box) is a later version of the RFTG line. The XO unit houses the GPS receiver which is essential for disciplining. Both boxes operate at 24 VDC and there is an interface cable drawing on line at KO4BB's web site. Never tried to hook them up together, but it might work. Maybe others here may know. Good luck with it. 73's Doug On Jul 18, 2016 12:52 PM, "Chris Waldrup" <[email protected]> wrote: > Hi Everyone, > > I have two Lucent RFTG boxes in my workshop. The XO is a loaner. > I'm curious if they will interface with each other or (most likely) > they are a different series as the interface connectors on each have a > different number of pins. > One is marked RFTG-u REF 0 > The other is RFTGm-II-XO > > Thanks in advance. > > Chris > KD4PBJ > > > _______________________________________________ > time-nuts mailing list -- [email protected] To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
