I got in a Z3812A (aka Lucent KS-24361 REF-0) and installed a Motorola UT+ in
it following the excellent guide by Peter Garde (google is your friend) and
have it working as a standalone GPSDO... basically it now a REF1 unit). The
mod mostly involves moving half a dozen 0 ohm resistors (I chopped out the
resistors... too lazy to unsolder them... and used wire wrap wire to replace
them)) The gps receiver was around $20 from RDR Electronics.
Yes, you could emulate the Motorola receiver with a newer model, but that is a
LOT of work to do correctly for very little benefit (I've never seen a receiver
that offers Motorola emulation get it entirely correct). Or you could use
Dan's GPS message faker hack, but lose the ability to fully control the ref0
via SCPI commands / Lady Heather and would wind up spending the same amount as
adding in the GPS receiver.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
