Hi Mike, A direct reply from Judah to the list:
> > Hello, > Following a discussion with Felicitas Arias and a number of others, > I have removed the registration requirement for the ut1 time server. It > is now open access. Enjoy. Note the usual limitation -- no more than 3 > requests in any 5 second period from any single ip address. > The current algorithm on the server uses the UT1 offset from > Circular A with no interpolation. The value changes at 0 UTC every day. > I did not use any interpolation because the difference in the dUT1 > value from one day to the next is on the order of 1-2 ms, and I > considered that it was likely that the jitter and asymmetry of the > network connection to a typical user would limit the accuracy to a > larger value anyway so that interpolation would not actually improve > anything. However, I will certainly consider changing this. It would not > be a big deal to add interpolation if there were some good reason for > doing so. > > Best wishes, > > Judah Levine > /tvb _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
