Warren wrote:
A damping setting in a Tbolt of greater than 2 is not a good idea.
It is if one is only concerned about frequency stability and accuracy and wants the best performance that can be obtained at tau < about 10 seconds.
And a TC setting of >1000 is not a good idea unless using the 'extended TC' mode.
I did not suggest setting the TC >1000. My suggesetion was to set the "recovery" mode "max offset frequency" (the furthest the Tbolt will allow the oscillator to go off frequency in order to correct the PPS phase) in that range. That only affects recovery (speeds it up), it doesn't do anything during normal operation. It may not need to be >1000, 100 may be plenty. I do not recall exactly where mine ended up.
Best regards, Charles _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
