HI Glenn... I think I have something for you, but I am traveling and it isn't on my laptop. I will look for it next week when I get home. It was the installation manual and has the pinout you need.
Tom Holmes, N8ZM -----Original Message----- From: time-nuts [mailto:[email protected]] On Behalf Of Glenn Little WB4UIV Sent: Monday, September 12, 2016 5:34 PM To: Discussion of precise time and frequency measurement <[email protected]> Subject: [time-nuts] Trimble receiver 37426-61 I have a Trimble receiver 37426-61 that I would like to see if it works. Does anyone have the pinout information for the Trimble 7 pin interface? The date code is 9905. This receiver is no longer in Trimble's database. Sure glad my doctor does not dump my records when I get that old. I would suspect that due to lack of foresite that this receiver will have a Y2K problem as it was build just before the turn of the century. I would also suspect that it will have a week 1024 rollover problem. Any help appreciated. 73 Glenn WB4UIV -- ----------------------------------------------------------------------- Glenn Little ARRL Technical Specialist QCWA LM 28417 Amateur Callsign: WB4UIV [email protected] AMSAT LM 2178 QTH: Goose Creek, SC USA (EM92xx) USSVI LM NRA LM SBE ARRL TAPR "It is not the class of license that the Amateur holds but the class of the Amateur that holds the license" --------------------------------------------------------------------------- _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
