Be careful of the pps output from the dual lucent boxes. Tried to use it to sync SL and found that it is a weird non-standard pulse and would not work even with a pulse stretcher as it looked too narrow. I use the pps output from a Jackson unit and it syncs SL fine.
73, Bill, WA2DVU Cape May -----Original Message----- From: time-nuts [mailto:[email protected]] On Behalf Of Hal Murray Sent: Thursday, September 22, 2016 2:07 AM To: Discussion of precise time and frequency measurement Cc: [email protected] Subject: Re: [time-nuts] Lucent RFTFm-II-XO > Is there a pinout posted somewhere for the Lucent box RS422 D sub 9 > connector? It's in the mail archives. Google for something like >time-nuts RS422 pinout< If you are interested in timing, you want the PPS signal too. (It won't be great over USB, but it might be fun to play with. You can get your own hanging bridges.) -- These are my opinions. I hate spam. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
