Likely the lowest cost way to get into that is with a TV tuner USB dongle. They cost about $20. People are able to get about 2.4 mega samples per second. Not a lot of dynamic range but you can control that. Use a mixer to move the signal of interest into the range the tuner can handle. Tuniers typically tune from about 20Mhz to 1Ghz or 2Ghz approximate.
On Sun, Oct 9, 2016 at 12:05 AM, Paul Boven <p.bo...@xs4all.nl> wrote: > Hi Randal, > > On 2016-10-07 18:52:57, Cube Central wrote: >> >> Is there an alternative that someone could point me to that would cost >> only a couple hundred rather than (what I expect) is a couple thousand? How >> would I go about gathering the data needed for these nifty ADEV graphs I see >> floating about in here? > > > People have reported (also on this list) that some SDR (software defined > radio) hardware is quite capable of emulating a 5120/5125, and even going > beyond it in performance. > > "Oscillator metrology with software defined radio, Sherman, J.A., Jördens, > R." - arXiv:1605.03505 [physics.ins-det] > https://arxiv.org/abs/1605.03505 > > Regards, Paul Boven. > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. -- Chris Albertson Redondo Beach, California _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.