Connector part numbers and wiring are here:
http://www.leapsecond.com/pages/tbolt/power.htm
David
On 11/29/16 10:39 AM, Bob Camp wrote:
Hi
The connector is a standard PC item. Pre wired supplies are an eBay item. Multi
output
industrial supplies are something I get from TRC. There are lots of vendors.
For bench
testing, hooking the harness to your normal bench supplies is probably a better
bet than
hooking into a brick.
Bob
On Nov 29, 2016, at 10:22 AM, W1KSZ <[email protected]> wrote:
The output level on one of my T-Bolts has dropped way off so it's off to the
bench with it.
I thought I had a spare power supply and power connector but it's no where to
be found.
Any suggestions where I can find a spare supply and power connector ? The one I
use is
powering another so I can't borrow it.
Tnx es HH, Dick, W1KSZ
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
