I'm a novice at time issues. I've been gathering info and I think I'm
ready to start asking questions.
A ublox NEO-M8T with an active timing antenna (GPS | GLONASS ?) seems to
be my best chance of being successful at my location.


*    Is there a more suitable GPS module than the ublox NEO-M8T for my
location issues?
*    Can anyone recommend an affordable suitable antenna for GPS & GLONASS?
*    One box or two, for running a local NTP host and receiving the PPS
from a GPS module?
*    Is there a better solution for a micro board than a Rasp Pi with
its USB controlled Ethernet, or the BBB with it's RF issues?
*    What am I not considering that could end up biting me?




* I would avoid a "timing" GPS module. Experience here shows that such modules are much more fussy about getting a good, clean GPS signal (understandable, of course) and will likely lose lock in more circumstances than a simple "position-only" module. Almost any GPS with a PPS output will be just fine for NTP use, and the u-blox units are some of the best you can get. Use your smartphone to see where the signal is best with a GPS status application.

* a simple patch antenna will be just fine, and allows you to place it where you like. You can get these with lead lengths up to 5 metres.

* Use an existing PC for the NTP server. Linux or Windows will be fine, just whatever you have. With a desktop PC, just be sure it has a real serial port and use the Sure GPS board. Even better, use a Raspberry Pi with the Uputronics board, and you can leave that running 24 x 7 at very low cost.


Unless you are into microsecond accuracy, the Raspberry Pi or BBB will be fine.

You'll find more information on my Web site.

The one thing you've not stated, though, is what accuracy is acceptable.

SatSignal Software - Quality software written to your requirements
Web: http://www.satsignal.eu
Email: david-tay...@blueyonder.co.uk
Twitter: @gm8arv
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to