Hi There are a number of SRS 620’s with big block letter warning sheets taped to the top of them about error 34. It is a *very* common thing to run into and (obviously) something the guys in the repair shop get tired of really fast.
Bob > On Dec 22, 2016, at 1:27 PM, Magnus Danielson <[email protected]> > wrote: > > Rick, > > On 12/22/2016 05:53 PM, W2GPS wrote: >> Time-nuts, >> >> My SR620 has started reporting "test error 34" on power-up and will do >> nothing after that. Does anyone know what that message means? I have a >> reasonable lab and I would try to repair the unit myself but I have no >> documentation. Is service documentation available or should I just ship it >> back to Stanford Research to get fixed? > > The manual, which you can download for free from SRS, says (page 57): > > "If the UHF prescaler of channel A is selected when > the unit is powered off and then on again, the unit > will display “TEST ERROR 34”. This error may be > corrected by deselecting the UHF of channel A. To > run this procedure, press input button of channel > “A” until UHF is not highlighted. Then turn the > power off and on again." > > So RTFM and execute accordingly might be all that you need to do. > > Best Regards, > Magnus > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
