Sorry, I missed the "complete unit" part... the TAPR products do require
some soldering. The TADD-2 does have a case available if that helps.
John
----
On 1/5/2017 8:21 AM, John Ackermann N8UR wrote:
Hi Bob --
TAPR has two boards that provide life support for Tom's PICDiv chips:
The "TADD-2" is a six-channel divider allowing each channel to have its
rate independently set from a common source:
https://www.tapr.org/kits_tadd-2.html
The "T2-Mini" is a tiny board that provides a single channel of PPS (or
whatever you want) from an RF input:
https://www.tapr.org/kits_t2-mini.html
John
----
On 1/5/2017 12:34 AM, Bob Stewart wrote:
Hi all,
I was wondering if anyone makes a nice, complete unit from one of
Tom's PICDivs; preferably with an external 10MHz input, a 10MHz output
and a 1PPS output? It would be nice if it also accepted a 1PPS in to
sync the PIC's output to an external 1PPS source, but that's not a
necessity. I've got something kludged together here that I can drive
from my Cs standard for testing, but I was hoping for something a bit
more purpose made if anyone makes one? Not looking for a kit or just
a board, nor do I have any interest in making/marketing such a unit.
Bob -----------------------------------------------------------------
AE6RV.com
GFS GPSDO list:
groups.yahoo.com/neo/groups/GFS-GPSDOs/info
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
