There's a surface-mount fuse on the back of the board. But pin 3 seems to show no leakage to other pins. I'd be surprised if connecting it has caused any damage.
Have you tried reconnecting it correctly ? On Sun, Feb 5, 2017 at 3:53 PM, Bob Camp <[email protected]> wrote: > Hi > > The power “brick” is a pretty standard Lucent part. The show up from time > to time > on the surplus market. The gotcha is that you may be able to buy a KS box > for less > than the asking price for the power brick. > > There are no schematics on these devices other than what some people have > traced > out here and there. The input to the power brick is simple enough that > it’s probably > worth simply tracing out on the board. That will involve pulling the board > completely > out of the chassis (which is a pain). Once it’s out, some quick ohm meter > checks between > the power inputs and the labeled pins on the power converter will give you > a pretty > good idea of what goes where. There *might* be a pc board mounted fuse on > there > somewhere …. > > Bob > > > On Feb 4, 2017, at 8:54 PM, Roland Wm Buzz Ude <[email protected]> > wrote: > > > > I,m brand new to this forum. I need your help. While powering up a > KS-24361 set of units for the first time, my power plug for P1 was wired > incorrectly!. Pin one (P1) was plus 24 VDC; Pin three (P1) minus 24 > VDC--this > > should have been pin two Tried same connection on both L101 and L102, no > activity of any kind. Where does pin three (P1) connect. I may have trashed > both units. Are schematics available. Thanks W8BUZ > > > > --- > > This email has been checked for viruses by Avast antivirus software. > > https://www.avast.com/antivirus > > > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
