I'm happy to run a group buy for just the 8736. My last quote from the vendor was just a bit under $27 each, and that does not come with the board connector. I picked these boards for compatibility with Motorola footprint, but also because it doesn't insist on goofy 3.0 volt power and logic levels for communication. It's happy with and rated for 3.3 volts which is desirable.
I'll start a new thread for a group buy with details once I get a fresh quote from the vendor. -Bob N3XKB On Fri, Mar 31, 2017 at 12:45 PM, Bob Camp <[email protected]> wrote: > Hi > > The 8736 is a very nice part. I think some sort of group buy would be a > good idea. > > Bob > > Sent from my iPhone > > > On Mar 31, 2017, at 12:14 PM, Bob Darlington <[email protected]> > wrote: > > > > I guess it's time for me to finish up that NTP cape for the BeagleBone. > > I'm using a Furuno GT-8736 ( http://www.furuno.com/en/ > > products/gnss-module/GT-8736 ) > > > > I built up a prototype about two years ago but... got married very > shortly > > after that and haven't played with it since. > > > > Is there any interest in something like this? As with past group buys, > I > > never charge a penny of profit and sell at cost. I want to say the > brand > > new GT-8736 boards are $26 a pop (my cost) from the vendor. > > > > Is there a better board from Furuno for timing applications? > > > > -Bob > > N3XKB > > > > On Fri, Mar 31, 2017 at 1:03 AM, David J Taylor < > > [email protected]> wrote: > > > >> From: Hal Murray > >> > >> That should work. I haven't found a GPS with PPS for the beaglebone. > What > >> level of accuracy do you want? If you only need 100 ms or so, then a > >> normal > >> junk GPS (no PPS) on USB should work. > >> ========================== > >> > >> This works with the BeagleBone: > >> > >> https://www.adafruit.com/product/746 > >> > >> Cheers, > >> David > >> -- > >> SatSignal Software - Quality software written to your requirements > >> Web: http://www.satsignal.eu > >> Email: [email protected] > >> Twitter: @gm8arv > >> _______________________________________________ > >> time-nuts mailing list -- [email protected] > >> To unsubscribe, go to https://www.febo.com/cgi-bin/m > >> ailman/listinfo/time-nuts > >> and follow the instructions there. > >> > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > > and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
