The word jumper may be misleading. Soldering/de-solderig of components required. In Appendix 19, "Configuration notes » there is an explanation of how to alter the function of pins 4,5,7.
> Le 3 avr. 2017 à 22:05, Philip Jackson <[email protected]> a écrit : > > I understand that the PRS10 Rubidium units either talk to the host > device via a RS-232 serial command language or via analog values using > the same set of pins in both cases. > > The manual says that internal jumpers can be used to switch between > communication modes. > > I have a PRS10 that is set for analog working and would like to switch > it over to RS-232 mode. > > A cursory peek inside the case with no disassembly doesn't reveal any > simple jumpers/headers that might be used to flip formats. > > Does anyone know how the format can be changed? > > The manual doesn't say anything more than there are jumpers inside that > can be changed. > > Many thanks > > Philip > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. "The power of accurate observation is commonly called cynicism by those who have not got it. » George Bernard Shaw _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
