Hello to the group. I suspect I will never see such a unit in the states. Also it wouldn't be useful. But that said its sounds as though its a traditional simple receiver that should be able to be reverse engineered. At least for the signal and locking chain. If a micro is involved then things get fuzzy fast. Anyhow good luck with you digging in. Regards Paul WB8TSL
On Mon, Jun 19, 2017 at 8:27 AM, Clint Jay <cjaysh...@gmail.com> wrote: > Thank you Stephen, Nigel, I'll take some pictures of the board in my OFS-1 > but it doesn't match any of the pictures I've tracked down so far. > > Interesting that the board mounted on the rear of the enclosure with the > trimmers appears to be Vero or perf board of some description... > > On 19 June 2017 at 11:54, Stephen Tompsett (G8LYB) <step...@tompsett.net> > wrote: > > > I have a little Halcyon information I managed to find a few years ago > > when I acquired a couple of PFS units. It includes a brief document on > > OFS alignment. > > > > I'll mail the documentation to you directly... > > > > > > On 19/06/2017 10:17, Clint Jay wrote: > > > I have been given a Halcyon Electronics OFS1 standard which seems to > > work, > > > it's a version that has 198KHz and 162KHz selector on the fron and > after > > a > > > reasonable period of time it displays 'lock' and gives a nicely stable > > 1,10 > > > and 10 MHz output on the front panel BNCs, (I know, it should be 1,5 > and > > > 10MHz out, read on) > > > > > > Does anyone know of a PDF manual? This version has two KHz crystals > > inside > > > it and I'd like to see how/if it's been modified so a manual with a > > > schematic would be even more useful. > > > > > > > > -- > > Stephen Tompsett (G8LYB) > > Tel: 01788 578940 > > Mob: 07956 855816 > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to https://www.febo.com/cgi-bin/ > > mailman/listinfo/time-nuts > > and follow the instructions there. > > > > > > -- > Clint. > > *No trees were harmed in the sending of this mail. However, a large number > of electrons were greatly inconvenienced.* > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.