On Sun, Jul 30, 2017, at 04:49 AM, Mark Sims wrote: > It looks like it took three hours for the effects of the rollover glitch > to mostly settle out. > > BTW, if you only use Lady Heather with a Thunderbolt, you can force the > rollover state from the command line or heather.cfg file by using the /ro > command line option. If you do that you won't have invalid dates for the > 10-15 seconds it takes for Heather's automatic rollover corrector to kick > in. If you have /ro in the heather.cfg file and wish to temporarily > cancel it to play with another receiver that does not have a rollover > issue, you can start Heather with /ro=0
I saw a very similar glitch. Out of curiosity, have you done anything particular to keep the oscillator so stable? Mine seems a bit more noisy: if I set my display to 2ppt/div as you have, things are off the scale. I typically see a span of ~1000-1500 ppt with an RMS of ~100-200 ppt. To be fair, I'm just using an old Cisco power supply from the eBay vendor that sold me the Thunderbolt, and my Thunderbolt is sitting on a block of foam on the floor in a room at the apartment with no particular temperature control. Cheers! -Pete -- Pete Stephenson
_______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
