Arthur Thanks for the picture. I have a TBolt also and its working just fine at the moment. But one day it may not. As several people have mentioned lightnings an issue.
So going down the crazy thought path for a moment. It appears from your pix you can figure out what the GPS receiver chip set is. The thought would be understand the chip set. Locate the TX RX and 1pps and plug another receiver in. Yes its a kluge and maybe a separate board level GPS receiver can not be found... But at least an approach. One other comment. If it is lightning then just maybe its the preamp chip. They are typically 3 pin soics and replaceable. Regards Paul WB8TSL On Fri, Aug 4, 2017 at 9:34 AM, Arthur Dent <[email protected]> wrote: > The Thunderbolt is a single board with the GPS receiver in the lower right > between the oscillator case and the connectors in the photo in this link. > > https://www.eevblog.com/forum/testgear/trimble-thunderbolt- > gps-disciplined-oscillator/?action=dlattach;attach=102948;image > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
